PDA

View Full Version : Bay Door latches source for new ones


encantotom
09-22-2009, 05:17 AM
hi all,

a few of us want to get some replacement latches for the bay doors. does anyone have a source for them? i am told newell doesnt have them anymore.

or if any of you know the manufacturer and or part number.

here is a picture of one of them.

thanks

tom

fulltiming
09-22-2009, 06:13 AM
Last one I got came from Newell. The receipt that I think included the lock indicated it was a Hansen 3-point Lock #2103-S and it was $68.50 over 3 years ago.

fulltiming
09-22-2009, 12:42 PM
Here is a listing for the 2103-S http://mooreindhardware.thomasnet.com/viewitems/latches-locks-locks-d-ring-locks/hansen-d-ring-locks?&forward=1&cov=NA&heading=&tgid=109752&tinid=&appid=124

prairieschooner
09-26-2009, 02:57 PM
One of these locks was very stiff on our '82. While we were at Doheney State Beach I took it apart and was able to repair it.
The assembly was removed from the bay door and put on the table and then disassembled setting the parts as they came off (you use a camera to help with reassembly). The matting surfaces were galling so they were cleaned off by scraping with a knife and then "polished" with a wire brush.The spring portion was distorted so it was re-formed using the end of a Crescent Wrench as an Anvil and a Ball Peen Hammer to lightly reform it. The parts were then reassembled with a small amount of lube on the mating surfaces.
The Lock works like new now and the others will be scheduled for similar attention.

Wally Arntzen
09-26-2009, 05:01 PM
I contacted the site that Michael mentioned and was able to get the locks and slides on the back of them for less than $10.00 each. I should have them monday and it sure is a better way than repalcing the entire latch. I will report on the results.

MrE
06-26-2012, 12:30 PM
I spent quite some time on the phone with Moore Industrial Hardware coming up with the correct part numbers so I thought it might be nice to update this thread with that information.
Moore Industrial Hardware www.mooreindhardware.co
1-888-MOORE-IH
CDRX-1250-HD key cylinder less slide bar, key 1250 with housing $7.32
223293 short slide bar $1.50