View Full Version : Water Pump not holding pressure
Gimpy
08-08-2012, 05:01 PM
I installed an Aquatek variable speed water pump in my water system. On our last trip it started out working great. However, as the trip progressed, I noticed that the pump would turn on periodically when no water was being used and there are No leaks.
ANY IDEAS?
Gimpy
Franco Filipovic
The Newell
08-09-2012, 03:56 AM
I have the sureflo 5.7gpm variable, But I installed the extreme Strainer at the inlet.
My 2nd trip I noticed psi dropping, Found teflon tape and polly bits clogging the strainer
The strainer was a screw off and was a easy fix.
If you have a strainer check it for clogging.
vBulletin® v3.8.8 Beta 4, Copyright ©2000-2024, vBulletin Solutions, Inc.