PDA

View Full Version : 1982 6V92 Engine/Transmission/oil/temperature?


Harry Wuner
12-17-2000, 03:13 PM
What temperatures are normal? Both the engine and tranny temp.on my 1982 6V92 turbo just come off the peg. Putting both the sensors in boiling water and they show about 215 or so. Going down the road, the engine temp shows about 160. On a hard pull, the tranny. temp comes up a little but not the engine oil temp. Is this OK? The engine cooling will rise with a hard pull and hot temp has gone to 220.

TechTalk
12-30-2000, 08:18 PM
All of the temperatures you reference appear normal, with the possible exception of the engine temperature stabilizing at 160 F, which sounds a little low. We would expect to see more like 180 F. You might have the thermostat tested to see if it's opening too soon, although even so, this would not be much of a problem.

Harry Wuner
12-30-2000, 09:30 PM
Thanks for your answer, I,ll just keep my eye on the temp. Also people need to know how IMPORTANT it is to keep the radiator clean