[Neweller]

Q
69 9/12/2000 2:32:36 PM 9/12/2000 Newell engineering service@newellcoach.com Battery Relocation We agree that placing the inverter as close as possible to the batteries is desirable. This is because minimizing cable length minimizes voltage drop from the batteries to the inverter, or from the charger to the batteries. If the inverter is also the battery charger, we also recommend that the inverter be wired to the batteries, and that the other 12 volt loads be on the far side of the batteries from the inverter/charger. That way, the batteries act as a filter for the somewhat "dirty" current that can be produced by a battery charger.

The exact placement of the batteries and the inverter is going to vary from coach to coach depending upon the space available, existing cabling, amount of work you want to put into it, etc. The battery box or rack should allow ample ventilation to the atmosphere, and the batteries should not be located where gassing that occurs during charging will corrode electronics or sensitive electrical connections. For example, the batteries and inverter should not be located in the same compartment.

We currently prefer the Statpower ProSine inverter over the Trace sine wave products. The ProSine uses different technology that substantially reduces the weight of the inverter compared to the Trace. In addition, the set-up and operation of the ProSine is simpler than the Trace, minimizing problems that might result from "operator error." Our preference is only that, and we have built a number of coaches at customer request with Trace sine wave inverters. Our customers with Trace inverters are happy. For the record, after a series of buyouts, the three major inverter manufacturers, Statpower, Trace, and Heart Interface, are now all owned by the same parent company.

Good luck with your project.