That is one of the 4 switches I checked. I have a switch on the instrument panel, one in the bathroom, one in the bedroom, and, of course, the one on the controller box at the generator. All 4 checked out. The instrument panel switch is the one I have to push in conjuntion with the temporary starter switch to start the generator now. When I press the original switch it does send a signal to the propane solenoid, opening it up and allowing propane to flow into the engine.....is that totally confusing?
(Added 3-12-2010 at 7am).....I might add that Steve Ward has suggested that a better way to test the 4 toggle switches is for voltage, not resistance....I've been doing ohm tests, so when he gets back in town we'll hookup and, as Steve says, "put a meter on it!".
|