Luxury Coach Lifestyles - View Single Post - speedo operation
View Single Post
Old 10-25-2009, 07:25 PM   #3
Summersgal
Senior Member
 
Summersgal's Avatar
 
Join Date: Sep 2009
Location: Muskogee, OK USA
Posts: 208
Default gear-driven electric sender

I am trying to locate that gear. I have found a round plate bolted next to the U-joints with holes in it and a proximity pickup at a right angle to the plate. I am assuming this is the cruise control. There is a type of sending unit in the bottom of the bell housing that has two wires on it, I thought this was the tempature sending unit(not sure). There is also a sensor of some kind located in the side of the pan toward the back that has a high presure hose (air/hydraulic) not sure, attached to it. Then there is an elctronic box that looks like the shifter. I am unable to find anything else that is on the side of the transmission with wires coming out of it. My speedometer and odometer do not work until I have driven around 15 miles, then the odometer will start working and speedometer needle will bounce all over the place. The bouncing will last another 5 or 6 miles before it settles done and starts working correctly. I would like to find this gear, any help would be appreciated.

Thanks

Jeff
__________________
Jeff and Pam
1996 Newell 45'/Tag
60 Series Detroit
Coach #432
Summersgal is offline   Reply With Quote