Quote:
Originally Posted by cdat
...Is it normal that the jake brake has to be set to on for the cruise control to function...
John
|
John,
We have the 2500 Cruise King, and it does not need the Jake on to run. However, apparently it sometimes looses its mind, Cruise King advised to do a reset/reboot.
-Turn the ON/OFF off for 5 seconds,
-Then turn in ON and OFF at least 10 times,
-Leaving it in the ON position after the ten times.
-Bring coach to 60mph and hit RESUME and it should work.
Seems to work for us, of course had I READ the install manual, it would have told me the same thing
Best Regards,