My two compressor switches are located side by side on the panel above the microwave. Normally 115vac compressor is on and the 12vdc compressor is off.
Funny, I was changing out the filter on the air dryer a couple days ago and wanted to drain all the air tanks before doing that. I turned the compressor off, or so I thought, and drained the air and went to work. Some time later I looked at the pressure gauge and it was back to 80 psig - what is going on? Turmns out, I had turned off the main water pump, not the main air compressor. Switches are close and labels could be better, but still my mistake. That little dentist sized compressor that is so quiet I cannot hear it running managed to completely fill all the tanks in a very short time. I was very impressed. I will be more careful next time. Russ
|