Finally found the problem.
The wire(romex) goes forward from the dinette area. Directly above the drivers seat, behind the cove cover there is a junction. For what ever reason, there are 3 outlets in the wall rear of the drivers seat, behind the chair. The junction above the drivers seat connects the romex from the dinette area to the 3 seperate romex wires to the outlets & an extension cord type wire that goes forward to the doghouse plug & air compressor. The black wire going to one of the plugs is connected somewhere to the netrual causing the circuit to trip.
Thaks to Toms advise I was able to remove all the covers. I also installed new coax, per Toms advise.
Gordon
P.S. I've tried to post some pictures, but have had no luck. The TV & Inverter are also done.
|