I have not been happy with the performance of the A/C in the salon area. Since I had everything apart I decided to take some advice from one of my online Newell friends and extended the outlet duct that dumped into the cove by adding additional 4" metal ducting. You can see the partition that Newell installed just aft of the driver/passenger seats. I drilled a 4" hole through that so that the air could flow as far forward as possible. I have removed the fluorescent cove lights. I will be installing LED lights in the cove. My friend ,Dave is applying the contact cement to the curved wall that we made. After the Wilsonart laminate is applied we will install it between the kitchen counter and the pantry. I completed the water plumbing and the reworking of the mid-mounted heat/ A/C this evening . I will try to send more pics...It takes me a fair amount of time to upload.....My computer skills are limited.
__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
|