[Richard and Rhonda]

Forrest,

There is a high probability that I am totally misunderstanding what you are saying. After all I am often wrong, but seldom in doubt.

Those cables you are talking about actuate the latches at the sides of the door. If they were too long you couldn't open the door. What locks the door is the elongated piece on the back side of the lock cylinder. Turn your key in the lock of one door that will lock and watch what it does on the backside. Now turn the lock on one of the doors that won't lock. I had a similar problem and the elongated piece was not installed in the correct orientation. The elongated piece should rotate and block the device below it from moving.

Call me if that doesn't make sense 817 223 2056