Turn Signals and Stop Lights
I recently replaced the front amber turn signals and the 6 rear red lights with leds.
The red leds are all wired in parallel for for each function.
I used butt splices to connect the leds.
I got them from the same place as Tom got his and the same price.
Thank you Tom for the info.
The only problem that I had was that the relays in the rear would not
operate and stayed on all the time when the turn signal was on.
I replaced the flasher relay with a new one that I got on ebay that
that does not flash faster with a burned out bulb for $11 including shipping.
The original flasher was a 2 wire unit and the new flasher had an extra ground wire to connect.
Every thing then worked great.
Ron Gookin
|