[folivier]

The PO sometime in the past added wood floors to the bathroom, bedroom, and front. He used a good quality product but evidently didn't replace the $20 toilet floor gasket! This past week I've been pulling out wet and rotten plywood. I've had to remove plywood down to the metal floor between the toilet and shower. My plans are to go back with solid layers of plywood in this area rather than using foam. This should give me a much more solid floor. I'm also using some products from rotdoctor.com CPES which is amazing how much is absorbed into the wood. This is an epoxy sealer which should prevent any future water damage. The dark areas on the plywood are from wet areas (thoroughly dried out now) after applying CPES (which darkens the plywood). After I have the floor rebuilt I'll probably put in a high quality vinyl floor tile, or ceramic. Haven't decided yet.