electric entrance step
hi all,
a question for you guys. i have a single step. it has been slightly loose for a while so when the sun was going down and it dipped to the low 100's i went out and did some looking at the mount. ends up the front left side is pulled away from the bottom of the coach. i tightened up the nut on the bottom of the step mount and it pulled up a little but not alot. it is clearly where my problem is. it is a nut on the bottom and not a bolt head. yet i cannot see or feel any bolt head in my stairway. have any of you taken the steps off and seen how they are mounted? i think my next step is to just take the whole thing off and see what the deal is. don't want to screw it up and just wondering if any of you have any wisdom.
later
tom
|