Luxury Coach Lifestyles - View Single Post

NewellCrazy · 09-03-2012, 11:56 PM

I made my ramps out of plywood. They are solid heavy and will not split.I ripped the plywood into 12" wide pieces and started with a 4 ft. piece and stepping each one back a few inches and cut a 45% angle on each. I ended up with about an 18" top and 12" high. Each piece was glued and screwed together.I made four when I was working on our newell. Just my way of doing it,but I felt safe using them.

09-03-2012, 11:56 PM	#6
NewellCrazy Senior Member Join Date: Sep 2006 Location: Sugarland, TX or Salida,CO Posts: 1,867	I made my ramps out of plywood. They are solid heavy and will not split.I ripped the plywood into 12" wide pieces and started with a 4 ft. piece and stepping each one back a few inches and cut a 45% angle on each. I ended up with about an 18" top and 12" high. Each piece was glued and screwed together.I made four when I was working on our newell. Just my way of doing it,but I felt safe using them. __________________ Sean If Ain't a Newell, It Ain't Wurt Oonin!