[prarieschooner]

I installed the replacement Switch Assembly the other day. I did have a couple of problems and would like to give you a "heads up" in case one of you needs to make this up-grade.
1st; the J-Bolts that secure the Cup to the Column needed a couple of washers in order to allow tightening. Simple fix with a run to the Hardware Store but the parts were not in the "Kit" making a repair on the road a little problematic.
2nd; The Steering Wheel Adapter made contact with the Hazard Switch Wiring and created a Short in the Brake Light Circuit...very frustrating! A few chosen words and I was able to move the Terminal on the Hazard Switch enough to allow it to clear the Wheel Adapter, much easier than having the Adapter Machined.
Other than these problems it does look like I have all of my Rear Lights Working properly now.
Thanks for all of the help,
Steve