Luxury Coach Lifestyles - View Single Post

HoosierDaddy · 12-28-2011, 01:39 PM

Hi Larry,
If this floor just lays in there JB would probably work. I'd still like to see a few rivets...especially on the side where the sidewall is rusted. If the floor secures your battery tray I would want a more robust arrangement ie more rivets or weld. Finish off with a bead of sealant around all edges top and bottom and a drain hole.
To Brad's point:
Stainless would work great. I am aware of a couple Amish sheetmetal shops in your area that could probably make a stainless "tray" that would drop in there. This would preclude the "weld in" option though.

12-28-2011, 01:39 PM	#13
HoosierDaddy Senior Member Join Date: Mar 2006 Location: Indiana Posts: 424	Hi Larry, If this floor just lays in there JB would probably work. I'd still like to see a few rivets...especially on the side where the sidewall is rusted. If the floor secures your battery tray I would want a more robust arrangement ie more rivets or weld. Finish off with a bead of sealant around all edges top and bottom and a drain hole. To Brad's point: Stainless would work great. I am aware of a couple Amish sheetmetal shops in your area that could probably make a stainless "tray" that would drop in there. This would preclude the "weld in" option though. __________________ 1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!