Luxury Coach Lifestyles - View Single Post

Neweller · 08-20-2012, 03:02 AM

Jack14R and Retired63, you both have the right idea. I'm in the planning stages too on building either a 40 x 80 or 50 x 100 shop. I have been going over things with a contractor who is telling me I could split the slab in half with one half 6" thick and the other half 4" to save money. Of course the 6" thick would be for working on a Newell or equipment etc. Now the fiber reinforced concrete came up as a good option allowing me to go with a thinner slab than without. 3/8" rebar 12" on center is another option for superior strength. I would say the ultimate might be an 8" 4000 psi with fiber reinforcement. Which is spendy and probably overkill.

Ken

08-20-2012, 03:02 AM	#5
Neweller Senior Member Join Date: Jan 2003 Location: Heartland Posts: 3,563	Jack14R and Retired63, you both have the right idea. I'm in the planning stages too on building either a 40 x 80 or 50 x 100 shop. I have been going over things with a contractor who is telling me I could split the slab in half with one half 6" thick and the other half 4" to save money. Of course the 6" thick would be for working on a Newell or equipment etc. Now the fiber reinforced concrete came up as a good option allowing me to go with a thinner slab than without. 3/8" rebar 12" on center is another option for superior strength. I would say the ultimate might be an 8" 4000 psi with fiber reinforcement. Which is spendy and probably overkill. Ken __________________ Ken Previous Owner of 3 Newell's Wanted: Newell Coach Needing Engine Replacement! If you want to sell, PM or Private Message me. Thanks! "I know I’m not perfect, and I don't live to be. But before you start pointing fingers, make sure your hands are clean." -Bob Marley