There are three screws that hold it in place, as I recall they are 7/16" heads so a 1/4" drive socket with a 7/16" socket will work best. Rotate the bulb and pull it out of the turn signal, then remove the 3 screws and carefully remove the turn signal unit. Now the empty headlight frame must be removed. There are two bolts on each side of the headlight frame. Using a 1/2" socket, remove these four bolts and carefully lower the frame out the bottom of the coach. If rear clearance is a major issue on your coach (I had less than 6" clearance from the rear of the headlight frame to the metal panel for the chassis HVAC unit), you will also have to remove the two electric horns and the horn relay.
|