[Richard and Rhonda]

Yes, look under the slide at the very front where the slide rod attaches to the slide. Remove the circlip and push the pin out. That will allow the gennie to slide out further.

Watch what you are doing. Pay attention that you don't pull it out so far that it clears the rollers, or else the gennie will fall. One look and you will understand what you are seeing.

Be careful when pushing it back in from the extended position that you don't trap and pinch cables.

This makes the gennie MUCH easier to work on.

If you had to take it completely out, this is the way you would do it. Of course placing jack stands under the front and back while backing the coach away from the gennie.