[Bikestuff]

Thanks Tuga!

****Don't follow these instructions until they are verified by one of the experts***

Maybe I am thinking about the wrong switch. Here is a typical scenario...

1) I recognize that I am going to go up or down an incline that will cause me to scrape the bottom.
2) Find a spot where I can safely wait.
3) On my coach I have a RAISE button on the HWH control panel...press that button (not sure if I have to hold it)
4) Wait the five minutes while the coach raises.

Now is where it gets interesting. If I think that I am tall enough, put the coach in gear and move slowly into position. If I don't have the right switch in the right position...as soon as I engage the transmission, the HWH will go back to Travel mode. (Thus defeating the purpose of the exercise).

5) Engage the override button
6) Move slowly (< 5 mph) into position.
7) Park the bus.
8) Disengage the override button and allow the coach to go to travel mode.
9) Wait a few minutes to get to travel mode.
10) Extend slides.
10) Use the auto level function to level the coach.


Cheers,bill