defrosters
when working behind the DC power panel in front of the passenger seat, i discovered that one of my hoses to a defroster vent going to the windshield was no longer attached to the vent.
the hose itself is on a custom crafted plastic plate that was glued to the bottom of the vent.
i gooped contact cement on both sides and let it set for a while. i put it up and it bonded, but was still warped and would leak air yet. so i took aluminum foil tape used for hvac ductwork (fantastic stuff) and sealed the pieces together. pretty simple fix.
i couldnt see all the vents, so i hope this is the only one not attached.
|