new headhunter water pump
hi all,
the headhunter aquajet 110v water pump was shot. i found a new headhunter mach5 pump from a surplus dealer for $375. i had to replump and remount the mach5 because it had a different configuration. i used pex sharkbite fittings so i didnt have to buy a crimper for the standard pex fittings. a plumber buddy of mine had some blue 1" pex i used for the inlet.
i had to mount the pump a little sideways to get it to fit. the nice thing about the sharkbite fittings is you can quick release them if needed.
there is a water valve controlled by a solenoid that is disconnected going into the water tank. i need to see what that is and get it replaced.
it turned out quite nice.
a few pictures below.
tom
|