Luxury Coach Lifestyles - View Single Post - 6V92 engine Turbo and Boost
View Single Post
Old 08-24-2012, 06:39 PM   #1
2StrokeDiesel
Member
 
Join Date: Aug 2012
Posts: 52
Default 6V92 engine Turbo and Boost

As I was inspecting my exhaust manifold and pipes to turbo, I noticed a large amount of air escaping at idle from one of the muffler clamps(the two pieces of exhaust pipe which are removable). Part of the leak was when I re-installed my turbo, I must not have turned the turbo piece which connects to the 2 exhaust pipes down far enough leaving a not so good seal. Anyways, I was spraying some soapy water on each joint and noticed bubbling(meaning small air leaks). So, is there something that can be put on the flanges where the exhaust connections are which will healp to seal a little better? Also, I broke one of the clamps(trying to tighten too much). It is a clamp with 4 sections and a large band with a single nut. Anyone know the name of the clamp? Just an fyi for anyone who has the removable exhaust pipe between the manifold and the turbo. Thanks
[TABLE]
[TR]
[/TR]
[/TABLE]
2StrokeDiesel is offline   Reply With Quote