Luxury Coach Lifestyles - View Single Post

HoosierDaddy · 07-27-2008, 03:14 AM

Thank you Michael! I had 2 new snoids here so I mounted them to the tag axle "up" position. That fixed the leaking regulator. When I disassembled the old snoids I found that the small "o" ring that the plunger seats on was out of place. I still cannot get the left side to rise when set on "travel" If I jump 12v direct to the travel snoid it will work. When the board is set to "travel" I get 12v at the travel snoid but no air to the bag. I'm suspecting a poor connection that will show OK on my test light but not enough current to trip the snoid.

07-27-2008, 03:14 AM	#20
HoosierDaddy Senior Member Join Date: Mar 2006 Location: Indiana Posts: 424	Thank you Michael! I had 2 new snoids here so I mounted them to the tag axle "up" position. That fixed the leaking regulator. When I disassembled the old snoids I found that the small "o" ring that the plunger seats on was out of place. I still cannot get the left side to rise when set on "travel" If I jump 12v direct to the travel snoid it will work. When the board is set to "travel" I get 12v at the travel snoid but no air to the bag. I'm suspecting a poor connection that will show OK on my test light but not enough current to trip the snoid. __________________ 1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!