|
09-22-2009, 05:17 AM
|
#1
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
Bay Door latches source for new ones
hi all,
a few of us want to get some replacement latches for the bay doors. does anyone have a source for them? i am told newell doesnt have them anymore.
or if any of you know the manufacturer and or part number.
here is a picture of one of them.
thanks
tom
__________________
|
|
|
09-22-2009, 06:13 AM
|
#2
|
Senior Member
Join Date: Feb 2006
Location: Texas
Posts: 1,558
|
Last one I got came from Newell. The receipt that I think included the lock indicated it was a Hansen 3-point Lock #2103-S and it was $68.50 over 3 years ago.
__________________
|
|
|
09-22-2009, 12:42 PM
|
#3
|
Senior Member
Join Date: Feb 2006
Location: Texas
Posts: 1,558
|
|
|
|
09-26-2009, 02:57 PM
|
#4
|
Senior Member
Join Date: Jun 2009
Location: Idyllwild, CA
Posts: 1,340
|
One of these locks was very stiff on our '82. While we were at Doheney State Beach I took it apart and was able to repair it.
The assembly was removed from the bay door and put on the table and then disassembled setting the parts as they came off (you use a camera to help with reassembly). The matting surfaces were galling so they were cleaned off by scraping with a knife and then "polished" with a wire brush.The spring portion was distorted so it was re-formed using the end of a Crescent Wrench as an Anvil and a Ball Peen Hammer to lightly reform it. The parts were then reassembled with a small amount of lube on the mating surfaces.
The Lock works like new now and the others will be scheduled for similar attention.
__________________
have Coach will Travel
Steve & Tricia
1982 Newell 38' (built before #1) 6V92 DD, 5 Speed Allison, 12.5 KW Kohler, Couch used to make into a Bed but I fixed it!
https://newellshowcase.com/thumbnails.php?album=214
2007 Yukon, 1981 CJ7 Laredo, 2002 Honda CRV, 1955 Thunderbird, 1952 Pontiac Sedan Delivery, 1952 Ford 8N, 1958 Airstream, 1959 Glasspar 16' Avalon, Cabin in the Woods........what will I work on next
[SIGPIC][/SIGPIC]
|
|
|
09-26-2009, 05:01 PM
|
#5
|
Senior Member
Join Date: Apr 2007
Location: Minnesota
Posts: 326
|
I contacted the site that Michael mentioned and was able to get the locks and slides on the back of them for less than $10.00 each. I should have them monday and it sure is a better way than repalcing the entire latch. I will report on the results.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|
|
|
06-26-2012, 12:30 PM
|
#6
|
Senior Member
Join Date: May 2012
Location: Boise Idaho
Posts: 719
|
I spent quite some time on the phone with Moore Industrial Hardware coming up with the correct part numbers so I thought it might be nice to update this thread with that information.
Moore Industrial Hardware www.mooreindhardware.co
1-888-MOORE-IH
CDRX-1250-HD key cylinder less slide bar, key 1250 with housing $7.32
223293 short slide bar $1.50
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|