|
04-28-2017, 02:55 PM
|
#1
|
New Member
Join Date: Apr 2017
Location: Atlanta
Posts: 5
|
Kohler Generator 20CC067-RV
Does anybody have a Kohler 20kW with a remote radiator that knows what the voltage to the blower fan would be and how to troubleshoot? My radiator and squirrel cage blower are in the next bay over and I cannot figure out why the blower motor will not turn on, some think there is a switch or sensor that might be fault and is not telling it to turn on. Thanks
__________________
|
|
|
05-06-2017, 03:02 PM
|
#2
|
New Member
Join Date: Sep 2016
Location: Austin
Posts: 7
|
First, make sure that when the generator is running, the fan is getting power from the generator. It should be powered anytime the generator is running and producing electricity.
__________________
|
|
|
05-06-2017, 05:32 PM
|
#3
|
New Member
Join Date: Apr 2017
Location: Atlanta
Posts: 5
|
Yeah there is a reset button next to the fuse and breaker on the control box that pops out after 5 seconds every time I turn on the generator, like the fan is pulling too many amps for it
|
|
|
05-11-2017, 03:43 AM
|
#4
|
New Member
Join Date: Sep 2016
Location: Austin
Posts: 7
|
Does the generator continue to run when the reset button pops out?
|
|
|
05-11-2017, 04:45 AM
|
#5
|
New Member
Join Date: Apr 2017
Location: Atlanta
Posts: 5
|
Yes it does, I have been told that those reset switches can go bad though. What is odd is that the reset switch would only turn off that fan
|
|
|
05-11-2017, 01:57 PM
|
#6
|
New Member
Join Date: Sep 2016
Location: Austin
Posts: 7
|
Guess it is possible but usually that would trip a breaker in the nearby breaker box.
|
|
|
05-11-2017, 06:52 PM
|
#7
|
New Member
Join Date: Apr 2017
Location: Atlanta
Posts: 5
|
As far as I can tell it does not have its own breaker, at least in the dedicated bass panel. To make it worse, I can't figure out how to get the motor out as there is no room and the screws holding this motor casing in to the floor are stripped, hoping to figure out that the rusted bracket at the bottom does not need to come out to remove the fan casing but no luck so far
|
|
|
05-11-2017, 06:53 PM
|
#8
|
New Member
Join Date: Apr 2017
Location: Atlanta
Posts: 5
|
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
All times are GMT. The time now is 05:17 AM.