new electric heaters
hi all,
as part of my updating i am replacing all the electric heaters. the perfectoe under the couch was recalled and was considered dangerous, so i bought an exact replacement and a new thermostat. the one in the bathroom i replaced this weekend. it wasnt quite the same size, but close. i had to cut about 2 inches out of the cabinet and it fit fine.
the old thermostats were daytons and were wired different than the new cadet 4398b that i got. so you need to be sure how to wire it when you put it in.
the cadet rm151 is what i put in the bathroom and will put the same in the bedroom and in the bay. the one i am replacing in the bedroom was malfunctioning and was overheating and had melted the metal grill. i measured it to be pulling 17.5 amps an 2100 watts. that is way over what it is rated and could have caught on fire. i got the heater from prosupply for 105 bucks delivered. thermostat was about 30 bucks.
the new ones have the ability to wire them to be at 500, 1000 or 1500 watts when on. which is 4.17amps, 8.34 amps or 12.5 amps. so if all 4 are on at full power you are drawing a full 50 amps for the electric heaters. i measure the one that came out of the bathroom and it was set at 1500 watts. the bedroom will be the same. i guess the motto is not to run all the electric heaters at once....
later
tom
|
Threaded Mode
