|
02-08-2014, 01:07 AM
|
#1
|
Member
Join Date: Jan 2014
Location: Kenai AK
Posts: 32
|
Classic leveling system
I am wondering about general function of the leveling system. Without self leveling what is a common practice as far as adjusting ride height, etc? I've got a few truck driver friends I could ask, but figured I would get a friendlier response here.
Also, what is the purpose for the 110v compressor? Isn't the Detroit powered compressor sufficient to handle the needs? Thanks!
-M
__________________
__________________
Micah S.
|
|
|
02-08-2014, 12:27 PM
|
#2
|
Senior Member
Join Date: May 2008
Location: Just North of Detroit, a surprizingly great city
Posts: 380
|
Micah: With my 77 coach I used fabricated plywood blocks that were just wider than the tires, starting at 2" thick and working up then going to 4". For the back, I used the same system except that the thicker ones were 4X4s topped with plywood. The 4X4s ran fore and aft and had gaps between them of a couple inches to save a bit of weight. These taller ones were sized to raise both tires together.
A 110v compressor may be beneficial for inflating tires depending on the pressure. My 77 needed only 85psi so the engine compressor was fine. My 93 coach needs 115 and the engine compressor won't do the job. The question is not what the maximum pressure of the compressor but rather what pressure it kicks in at as that is what really determines suitability.
Stay warm
__________________
__________________
Jon and Alie Kabbe
Started with 77 Coach
Now have 39' 93 coach
2007 civic toad
|
|
|
02-08-2014, 02:27 PM
|
#3
|
Senior Member
Join Date: Jan 2012
Location: Southwest NM
Posts: 346
|
Also, when parked the 11oV compressor provides the air supply for the automatic air leveling system. It does a self check I believe about every 30 minutes & makes small adjustments as needed to keep the coach level.
__________________
Clint C. Johnson / Fran Balm
Coach 289 '92 42'6" 8V92 Hybrid
Several Toads:
XL-7
F-350 4X4 Crewcab
F-250 4X4 Crewcab
|
|
|
02-08-2014, 05:05 PM
|
#4
|
Senior Member
Join Date: May 2012
Location: Boise Idaho
Posts: 719
|
Micah,
When manual leveling is turned off my 86 has rods to adjust the ride height, too low air is added, too high and air is expelled. Here's a link discussing Newell's recommendation for ride height. http://www.luxurycoachlifestyle.com/...de-hieght.html
When terrain has dictated, I have manually raised the height and driven with the manual leveling on.
Hope that helps.
__________________
Jon & Chris Everton
1986 40' Dog House #86
0 hp 8V92 Allison HT740
Soon to be 500hp ISM with ZF 6 Speed
|
|
|
04-16-2014, 01:21 PM
|
#5
|
Member
Join Date: Jan 2014
Location: Kenai AK
Posts: 32
|
I've been so busy I didn't get a chance to follow up on this post but thanks for the replies! It makes perfect sense.
I'm working on the pneumatic system now. Anyone know why there isn't a drain valve on the tag axle tank? I can't seem to find a way to drain the back tank.
__________________
Micah S.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
All times are GMT. The time now is 06:58 PM.