|
03-24-2010, 07:20 PM
|
#1
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Fumoto valve?
Those of you that do your own oil changes, do you use a Fumoto valve http://www.quickoildrainvalve.com/Pr...oductCode=T202
Seems like it would make the process much easier since you can stop the flow to use smaller containers?
__________________
|
|
|
03-25-2010, 12:30 AM
|
#2
|
Senior Member
Join Date: May 2006
Location: Houma, LA
Posts: 886
|
Forest,
There is an oil changing business in Houma on Grand Calliou Road, Pennzoil Quick Lube I think is the name. They will change your oil FREE - no labor! Just bring your new oil and the filters and they will change it at no charge, and they dispose of the old oil for you.
They used to charge $45 labor if you brought your own oil and filters. That's where I have mine changed. Your can't beat the price. However, they don't grease or check anything. You will have to do that yourself; but you won't have 10 gallons of oil to dispose of either.
Not a bad deal.
__________________
__________________
Tuga & Karen Gaidry
1999 Newell 45 w/2 slides
Coach #512
2005 Pilot
|
|
|
03-25-2010, 01:11 AM
|
#3
|
Senior Member
Join Date: Oct 2007
Location: Huntington WV
Posts: 1,041
|
Forrest,
I bought one, but will wait until the next oil change to install. It's a solid piece of engineering. I got it for exactly the reason you mentioned. It's hard to get a 10 gallon container under the coach without an engine.
On the other hand, if I had access to Tuga's setup, that would be the ticket.
__________________
Richard Rhonda Ty and Alex Entrekin
1995 Newell # 390 DD Series 60, Allison World Trans
Subaru Outback toad
CoMotion Tandem
Often wrong, but seldom in doubt
Rhonda's chronicle https://wersquared.wordpress.com/
|
|
|
03-25-2010, 02:17 AM
|
#4
|
Senior Member
Join Date: Apr 2007
Location: Minnesota
Posts: 326
|
I bought a porta dump at camping world that I got on sale for 25.00 and it works prefect. You drain it into the flat blue cantainer which is on wheels and pull out after you put the plug back on the pan and put on the cover. It can be rolled and lifted into a vehicle and brought somewhere to be desposed of. No muss no fuss and you don't need any special tools.
Thats my 2 cents worth and i'm sticking with it.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|
|
|
05-02-2010, 01:17 AM
|
#5
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Hey Richard, if this guy can do it this way I know you can.
Posted on Rv.net:
"Today I installed a Fumoto valve on my CAT engine. THis is about the seventh time I've installed a Fumoto valve and I wanted to give the RV.NET readers the benefit of my experience.
This is easily done without draining the oil by drawing a vacuun on the pan by applying a vacuum cleaner to the oil fill. You may also have to stuff the crankcase slobber tube with a rag to get a good suction. Then, with the vacuum cleaner running, remover the old plug and install the Fumoto. Shut off and remove the vacuum cleaner and be sure to remove the rag in the slobber tube. The above has all been said before.
Here is my pwersonal tip that makes this work. MAKE SURE THE VACUUM HOSE IS PLUGGED INTO THE VACUUM SIDE OF THE CLEANER. IF...YOU PLUG IT INTO THE BLOWER SIDE OF THE CLEANER IT WILL MAKE QUITE A MESS WHEN YOU REMOVE THE PLUG.
Please dont embarrass me by asking how I know.
Paul "
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|