I need to remove the vertical carpeted panel beneath the steering wheel. The panel has a slot cut in it for the brake pedal arm. Per chance, is it held in place similarly to the panel on the passenger side behind which are a number of 12 volt fuses (that I can get off)? I just purchased a VMSPC and it seems like behind this panel will be the best place to mount the unit.
__________________
__________________
Tim and Laura
2000, 45', Single Slide
Coach 541
Tim,
That panel has a small clip at the bottom & a detent ball clip on top. Put your fingers over the top & pull toward yourself. You will hear the detent ball release. Now work it up and back toward yourself & remove. Reassemble in reverse.
Thanks rheavn, I will give it a try sometime this week. Russ, I plan on preparing a post once I get the install done. It will show what you are asking about. Likely will happen within a month although everything I do on this rig seems to take longer than I estimate.
__________________
Tim and Laura
2000, 45', Single Slide
Coach 541