PDA

View Full Version : ride height valves


encantotom
01-01-2012, 12:13 AM
had the ride height valves adjusted. the 4 corners were way out of whack.

got them pretty close but had to go back and forth a few times.

one of them is now leakings so am going to get 3 new ones.

tomh

encantotom
01-08-2012, 12:53 AM
i got 4 new leveling valves this week. got them for $30 each. I hope to get them installed this next week. one of the valves i have is leaking all the time. they appear to be identical to the ones i have.

tom

lbrachfe
01-08-2012, 04:48 PM
Newell charged me 500. To change out all four last year and suggests they be change every two years.Both my drivers side valves needed replacement which is what prompted this during a visit to OK.

encantotom
01-08-2012, 06:19 PM
i only have 3 leveling valves. do you have 4? i bought an extra that is why i got 4.

tom

lbrachfe
01-09-2012, 01:52 AM
Just looked at the bill and it says 4.....

encantotom
01-09-2012, 02:32 AM
interesting. they must have changed designs in 2003.

tom

encantotom
01-15-2012, 02:10 AM
i know everyone has different ones, but...

the two rear leveling valves on mine were Barksdale 52321-Q135 the Q135 denotes the length of the arm. the arm was 7 3/4" long

the front one was a Barksdale 52321-Q136 it was a short arm.

what i did was buy the cheapest Barksdale 52321 valve i could get and then i had the mechanic take the arm off (they were the wrong length) and use the arm that was on the coach.

worked just fine.

tom