Flourescent light inverters

[encantotom]

hi all,

i have a bunch of the 12v inverters that go inside the flourescent light fixtures. there were a bunch of them in my 1990 that i took out when i put led strips in them.

gordon gave me a bunch of them as well, so i have alot available if anyone wants them. no cost. first come first serve.

let me know. they are small.

tom

[larryweikart]

Tom I'll take a few when I get there Sat.

[HoosierDaddy]

If these inverters are for the flourescent lights in the salon and bedroom area I could use a few....Send em with Larry if that's OK.
Dean

[encantotom]

Yes they are. Will give yours to larry or I can mail them if you want. Either way is fine. Tom

[HoosierDaddy]

Send em with Larry if he's ok with that

[larryweikart]

That's just fine with me. I'll bring them back on the 23rd.

[chockwald]

I came across this product on one of the RV blogs I read. It is a replacement LED light tube for 12" and 18" flourescent tubes. This tube has LED's inside and can be installed using the existing flourscent fixture. The 12" ones cost $36 each (pricey to be sure) and the 18" ones cost $46 each. Here is the link: http://www.coilnwrap.com/products/T%252d8-LED-18%22-Fluorescent-Replacement.html

Is anyone familiair with this product, or have any opinions about its practicality?

[prairieschooner]

I have seen these at Yuma and at Quartzsite, maybe for a bit less $$$ but they would be easier to install than what the rest of use have been doing.
I'll try to get over to the Yuma Marketplace next week and check the prices.