PDA

View Full Version : Holding Tank Clogged Up


Gary&Terry
01-02-2013, 06:10 PM
Everything was working fine until I used the washing machine and now I cant get the holding tank to drain. The washer must have broken stuff loose in tank? Wash cycle worked fine then it fill my shower up and took all night to drain out.

Gary

NewellCrazy
01-02-2013, 08:25 PM
Hi Gary,

Are you sure the drain valve is opening up all the way? You may need to remove the valve and associated piping, to try and determine if the clog is right there (at the drain valve) or higher up. If you remove some of those plumbing angles, maybe you can see up into the piping/tank and determine the source of the clog.

Sean

express1
01-02-2013, 10:00 PM
Hi Gary,

Are you sure the drain valve is opening up all the way? You may need to remove the valve and associated piping, to try and determine if the clog is right there (at the drain valve) or higher up. If you remove some of those plumbing angles, maybe you can see up into the piping/tank and determine the source of the clog.

Sean
Thats really "looking for trouble":o
Try the curb side dump. Both cannot be broken.