Luxury Coach Lifestyles - View Single Post - Diamondshield Removal on front Cap of Coach

jwe648 · 03-22-2012, 05:25 PM

This is what the Diamond Shield folks say... So it seems you're following the right path.. good music and a cocktail would help also!
"Diamond Shield Nano-Fusion Paint Protection Film can be removed from any OEM paint surface by first softening the film and adhesive using a hair dryer or heat gun then lift the film at approx. 15° angle; standing to the side pull the film toward you thereby releasing the film from the surface. If any sections are known to have been repainted, extreme care should be taken on those sections during removal. Complete warming of the surface must be achieved before pulling the film off slowly, continuously heat the film at the peel point during removal. Be careful not to overheat the film or it will become too soft and tear".

03-22-2012, 05:25 PM	#8
jwe648 Senior Member Join Date: Jul 2009 Posts: 194	This is what the Diamond Shield folks say... So it seems you're following the right path.. good music and a cocktail would help also! "Diamond Shield Nano-Fusion Paint Protection Film can be removed from any OEM paint surface by first softening the film and adhesive using a hair dryer or heat gun then lift the film at approx. 15° angle; standing to the side pull the film toward you thereby releasing the film from the surface. If any sections are known to have been repainted, extreme care should be taken on those sections during removal. Complete warming of the surface must be achieved before pulling the film off slowly, continuously heat the film at the peel point during removal. Be careful not to overheat the film or it will become too soft and tear". __________________ Jimmy