Luxury Coach Lifestyles - View Single Post - Door Repair (Where's Rosie-the-riveter when I need her?)

tuga · 02-11-2010, 01:03 PM

I have used an epoxy - PC 7. It is a 2 part epoxy, and it works great.

I used it on my AC grills which are mounted in a bay door on each side of my coach. We removed the grills, sanded them, cleaned them, and then applied the PC 7 and re-installed. Good strong weld that has held for about 4 years so far.

I would recommend PC 7 (can buy it at any hardware store) for any PERMANENT job.

02-11-2010, 01:03 PM	#5
tuga Senior Member Join Date: May 2006 Location: Houma, LA Posts: 886	PC 7 epoxy I have used an epoxy - PC 7. It is a 2 part epoxy, and it works great. I used it on my AC grills which are mounted in a bay door on each side of my coach. We removed the grills, sanded them, cleaned them, and then applied the PC 7 and re-installed. Good strong weld that has held for about 4 years so far. I would recommend PC 7 (can buy it at any hardware store) for any PERMANENT job. __________________ Tuga & Karen Gaidry 1999 Newell 45 w/2 slides Coach #512 2005 Pilot