Luxury Coach Lifestyles - View Single Post

Art Knapp · 10-06-2000, 12:26 AM

Our 1983 Newell (Bettin) has a Sanitron electric odor control system. There are 12 volt wires connected to electrodes on the holding tank. The wires terminate in a small aluminum box in the holding tank compartment. The electrodes have become severely corroded. Some of the wires are broken and have been spliced or taped. The manual (1987) says there is a Sanitron control panel in the tankage compartment and that this panel has an on/off switch and a test switch. There is no such panel in my compartment. Can you give me some advice on restoring the Sanitron system and how to locate a Sanitron control panel?

Thanks for your help.
Art Knapp

10-06-2000, 12:26 AM	#1
Art Knapp New Member Join Date: Sep 2007 Posts: 6	Sanitron Question Our 1983 Newell (Bettin) has a Sanitron electric odor control system. There are 12 volt wires connected to electrodes on the holding tank. The wires terminate in a small aluminum box in the holding tank compartment. The electrodes have become severely corroded. Some of the wires are broken and have been spliced or taped. The manual (1987) says there is a Sanitron control panel in the tankage compartment and that this panel has an on/off switch and a test switch. There is no such panel in my compartment. Can you give me some advice on restoring the Sanitron system and how to locate a Sanitron control panel? Thanks for your help. Art Knapp