[Richard and Rhonda]

Hi Jen,

I replaced a boiler in the exact same config you have for an owner here in Fort Worth. First take off the cord reel, it will give you more room than you imagine. Second, I think you will find the boiler is either just sitting on a piece of plywood or bolted to a piece that will come out. Unplug the boiler and get it out as far as you can and then you will have more working room to unwire it.

Toughie will be putting the inverter back in the same space if it's foot print is larger than the bottom of the bay. If it is you will have to mount in on the side of the bay, I would cut a piece of plywood slightly bigger and mount the inverter to it, use a boatload of industrial velcro on the plywood and the bay wall, wire it up and stick the plywood to the wall. Voila.