[Newell Attack]

Did you interrupt your 120v supply , If the ice maker was working an you lost power 120 to the Refer it will shut down the cycle of the ice maker an you have too wait for a complete recycle off the timer before it will refill and start producing ice again You can remove the white cover on the unit itself and there are test points you can check with a meter an also energize the water valve/ also check an see if the filter screen in the valve may be clogged with debris .. Your refer shutting down you need too check an make sure the burner is clean and got a good flame if so you may have a bad thermcouple an this is what tells the control board you have a good flame if not it shuts down the gas for safety / easy too change Phillips screwdriver / 1 screw near the burner 1 in the top of control board an 2 spade connections on the board itself !! Hope this helps its all repairable

Jeff