[Richard and Rhonda]

Les,

Relative to your comment on securing the new fridge. If yours is like mine, you use the wheels on the bottom of the fridge. Raise the fridge using the wheels. There should be some hex head screws on the front plate behind the louver grill at the bottom. There is a cross piece above the fridge. Raising the fridge jams the top into the cross piece. Mine also has couple of pieces of angled metal screwed at the bottom, but truthfully they are so small I think they are decorative. Be aware that when you raise the fridge you need to keep it level, since you can adjust the four wheels independantly. I use the edge of the cabinet to check side to side and top to bottom.