The height of the travel leveling system is adjustable. You may have a bent or slipped connector on the travel height rod on the left side. Trying to get to the level adjustment isn't easy without putting yourself in a bad place if the coach were to drop so if is essential to have cribbing or high capacity jack stands under the frame to keep it from accidentally dropping on you. Make all adjustments with the leveling system and ignition turned off. Extending the length of the rod on the left rear will cause the travel leveling system to think the coach is sitting to low and try to raise the coach to compensate. Of course it is also possible that the travel height valve on that side is defective but your comment about jumping the travel solenoid causes it to start to lower would have me looking at moving the adjustment upward on the left rear rod first.
|