Jennifer, your right, it is much better to use brass than the plastic. Compression fittings are very easy to use all you need is two wrenches normally 7/16, 1/2 or 5/8 depending on the size of the line. On mine the air lines are from 1/4 all the way to 5/8 depending on what it is used for. You can get any of the brass fittings at a truck supply place and home depot also has a large supply of just about any fitting you will need.
You will to get the check valves at a truck supply place like a bus repair place or kenworth, volvo, etc. I had to go to a special company to get the air switches.
Wally
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|