Richard,
I solved the problem. About a week ago I had new inverters installed as well as AGS. In doing so, the installers unplugged the remote start (6 pins plug on the back side of the generator control box. and when they put the plug back together they bent one of the pins (Water temp) and therefore the plug did not fit correctly and that is why the water temp. gauge was not working. Opening and closing the gen slide a few times the plug worked loose.
I straighten the pin and re-plugged and everything is back to normal, gauges as well.
Nando
__________________
Nando Garbarino
Lehigh Acres, Florida
1996 #410
|