Luxury Coach Lifestyles - View Single Post - Can I spray WD 40 on my 50 to 30 amp adapter

Newellin Thunder · 02-22-2013, 10:13 PM

WD-40 is flammable and really isn't good to use on areas where electrical connections are intended. As someone that has worked on high-voltage systems up through 69KV IMHO there are many other solutions to your problem.

In addition to the materials mentioned above designed for electrical aplications if I were you I would ensure the connector pins are properly aligned and clean. For cleaning the inside (assuming it's a sealed connector) CRC makes two great products just for electrical cleaning.

02-22-2013, 10:13 PM	#6
Newellin Thunder Senior Member Join Date: Aug 2012 Posts: 130	WD-40 is flammable and really isn't good to use on areas where electrical connections are intended. As someone that has worked on high-voltage systems up through 69KV IMHO there are many other solutions to your problem. In addition to the materials mentioned above designed for electrical aplications if I were you I would ensure the connector pins are properly aligned and clean. For cleaning the inside (assuming it's a sealed connector) CRC makes two great products just for electrical cleaning. __________________ Ernest Jenkins 2005 Newell Thunder Shakin the open road!