Dean, assuming that you have the HWH autoleveling keypad, turning on the ignition key will send it to travel mode. Immediately press level and it will stay where it is. You can then either manually level through the use of the front/rear/left/right up and down buttons or press the level button twice in rapid succession for auto level to occur. Autolevel automatically takes the high side or end of the coach and dumps it. If that doesn't level the coach, it then begins to add air to the still low side/end of the coach. If it is out of level both side to side and front to back it will deal with the front to back level first then the side to side. I don't know if the programmed logic changed in later years but that is the way it worked back in the early '90's.
|