[mnhoff]

Just wanted to touch on choice of high presuure laminates. Working with these products there is many choices. In my mind formica and arbourite are at the bottom of the scale of laminates. Moving upward my next choice would be wilsonart then two others I can not think of at this moment, then the best out there in my mind is Nevamar. Clearly the best. My choice in contact is Latex. Most of the time it comes in a green can and says covers 3 1/2 times more than other brands. It acctually does. It costs about $80.00 per gallon so most people shy away from it because other brands are only $30.00. If you have not purchased laminate before it comes in 4x8 and 5x12 sheets. Cuts easily on a table saw to get to approx size. Once glued into position my choice is a flush cut router bit with a roller bearing to keep it just slightly away from contact from other laminate ect. Finish edge with a fine bastard file then a wood block with 120 garnet paper.