Quote:
Originally Posted by mnhoff
Just wanted to touch on choice of high presuure laminates. Working with these products there is many choices. In my mind formica and arbourite are at the bottom of the scale of laminates. Moving upward my next choice would be wilsonart then two others I can not think of at this moment, then the best out there in my mind is Nevamar. Clearly the best. My choice in contact is Latex. Most of the time it comes in a green can and says covers 3 1/2 times more than other brands. It acctually does. It costs about $80.00 per gallon so most people shy away from it because other brands are only $30.00. If you have not purchased laminate before it comes in 4x8 and 5x12 sheets. Cuts easily on a table saw to get to approx size. Once glued into position my choice is a flush cut router bit with a roller bearing to keep it just slightly away from contact from other laminate ect. Finish edge with a fine bastard file then a wood block with 120 garnet paper.
|
So does this stuff bend easy? or do you have to use a heat gun or something?
__________________
Keith, Krista and Family
77 38' Newell Coach Repowered from Smokin' V555TA To 325hp 8.3 inline 6 cummins, Allison 3000 series trans
87 40' Newell Coach 475hp 8V92 DD(sold)
22' 350hp Jet Riverboat
79 Ford F250 4x4
Many others to list
|