|
|
11-02-2010, 09:53 PM
|
#21
|
Senior Member
Join Date: Oct 2007
Location: Huntington WV
Posts: 1,041
|
Are you going to strip the old paint? If not you need to scuff it with something like a 3M pad, and apply a sealant that is compatible with the top coat paint you will use. If not the paint will likely peel.
If you do strip it, then you are in for a whole different job. You must prime the aluminum with something like Allodyne, then use a primer, then the top coat.
Putting the top coat directly on the old paint, or on raw aluminum is not a long term solution in my opinion.
If you use Imron, be very careful. It is extremely toxic to breathe. It is a cyanoacrlyate catalyzed paint that basically adheres to your lung tissue like superglue.
You MUST use a respirator with supply air.
__________________
__________________
Richard Rhonda Ty and Alex Entrekin
1995 Newell # 390 DD Series 60, Allison World Trans
Subaru Outback toad
CoMotion Tandem
Often wrong, but seldom in doubt
Rhonda's chronicle https://wersquared.wordpress.com/
|
|
|
11-03-2010, 11:52 AM
|
#22
|
Senior Member
Join Date: Feb 2006
Location: Iyopawa Island, Mi. (sometimes)
Posts: 421
|
Thanks again for the additional information, I will visit my local Sherwin Williams store to check out the options. They certainly have some excellent products,as we found out recently when we had our home repainted using their Duration house paint, which is guaranteed for life against fading, chipping or peeling. Pretty expensive but well wish the extra $$!
__________________
__________________
1994 Newell #365 w/Corvette, 2002 streetrod 34 ford golf cart, 2009 Smart Car, 1958 Century Coronado, 1965 Cruisers Inc, CAR & BOAT CRAZY! LOVE OUR NEWELL!
|
|
|
11-04-2010, 03:03 AM
|
#23
|
Senior Member
Join Date: Jun 2009
Location: Idyllwild, CA
Posts: 1,340
|
Larry,
Typically you can do a "test" on an area. I think that you will find when you check with the paint supplier that the old paint has been able to fully cure and can be re-coated. Newell uses high end paints so the prep work should be minimal. I have been using a two part single stage paint by PPG on our '52 Pontiac, it is easy to work with but is somewhat pricey (and so are our Newells!)
Anyway I would like to see a couple of pictures of your Century.
__________________
have Coach will Travel
Steve & Tricia
1982 Newell 38' (built before #1) 6V92 DD, 5 Speed Allison, 12.5 KW Kohler, Couch used to make into a Bed but I fixed it!
https://newellshowcase.com/thumbnails.php?album=214
2007 Yukon, 1981 CJ7 Laredo, 2002 Honda CRV, 1955 Thunderbird, 1952 Pontiac Sedan Delivery, 1952 Ford 8N, 1958 Airstream, 1959 Glasspar 16' Avalon, Cabin in the Woods........what will I work on next
[SIGPIC][/SIGPIC]
|
|
|
11-05-2010, 12:45 AM
|
#24
|
Senior Member
Join Date: Feb 2006
Location: Iyopawa Island, Mi. (sometimes)
Posts: 421
|
Thanks Steve, I will definitely do a test area.I would love to send a couple pics of the century as soon as I figure out how to reduce the size so they will fit. Any instructions?
__________________
1994 Newell #365 w/Corvette, 2002 streetrod 34 ford golf cart, 2009 Smart Car, 1958 Century Coronado, 1965 Cruisers Inc, CAR & BOAT CRAZY! LOVE OUR NEWELL!
|
|
|
11-05-2010, 09:29 PM
|
#25
|
Member
Join Date: Mar 2006
Location: Springfield Missouri 65802
Posts: 31
|
Imron requires not only respriator but eye and skin protection. I used a self-contained battery power positive power system from 3-M company. For paint go to a professional automotive or truck paint supply for automotive products. I painted a 3 color Imron job on my 71 using 3.5 Imron and a clear coat overcoat. Imron was the system used by Newell shop on all Newells from the start. Original was 5.0, new system is Low-vol 3.5. My 71 had white top a green mask and clear over the aluminum. New paint is white top purple mask & stripe with a blue bottom. Automotive paint is a special product. Paint work prep paint and finish required about 5 weeks. Big project.
Sherwin Williams paint is no match. I did try a bright red enamal on my 59 Ford flat bed about 3 years ago. It's faded and lost much color in the short time. They said it was a heavy duty enamel sutable for outside use. I know better but it was cheep. Got what I paid for. Happy to tell what I know about paint process 417-866-0261.
James Tuckness
|
|
|
11-06-2010, 11:52 AM
|
#26
|
Senior Member
Join Date: Feb 2006
Location: Iyopawa Island, Mi. (sometimes)
Posts: 421
|
Thanks James. Wow, I may be biting off more than I want to chew. I will spend a lot more time investigating my options before beginning this project. May have to wait til spring or do it when we go to Fl. Of course, if you have nothing else to do........................!
__________________
1994 Newell #365 w/Corvette, 2002 streetrod 34 ford golf cart, 2009 Smart Car, 1958 Century Coronado, 1965 Cruisers Inc, CAR & BOAT CRAZY! LOVE OUR NEWELL!
|
|
|
11-06-2010, 02:03 PM
|
#27
|
Senior Member
Join Date: Jun 2009
Location: Idyllwild, CA
Posts: 1,340
|
Larry,
DETCO makes a 2 part epoxy type paint that can be rolled and tipped or sprayed. Sterling has become the standard for painting yachts and looks like it was sprayed when applied correctly by brush (rolled and tipped). You may consider hiring this out just because of having to be on the roof;
http://www.detcomarine.com/
if you though that automotive paint was expensive hold on! this stuff looks great and lasts unbelievably but you get what you pay for.
__________________
have Coach will Travel
Steve & Tricia
1982 Newell 38' (built before #1) 6V92 DD, 5 Speed Allison, 12.5 KW Kohler, Couch used to make into a Bed but I fixed it!
https://newellshowcase.com/thumbnails.php?album=214
2007 Yukon, 1981 CJ7 Laredo, 2002 Honda CRV, 1955 Thunderbird, 1952 Pontiac Sedan Delivery, 1952 Ford 8N, 1958 Airstream, 1959 Glasspar 16' Avalon, Cabin in the Woods........what will I work on next
[SIGPIC][/SIGPIC]
|
|
|
11-06-2010, 02:19 PM
|
#28
|
Senior Member
Join Date: Mar 2006
Location: Indiana
Posts: 424
|
I'll make you a deal Larry.....I'll come and help you then you can help me paint mine later!
Dean
__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
|
|
|
11-06-2010, 08:26 PM
|
#29
|
Senior Member
Join Date: Mar 2009
Location: south louisiana
Posts: 654
|
Back to Subject?
Windshield replacement.
I will be replacing both sides in the next week or two. I may have a few photos to post.
My Son has a new Glass Company (Performance Glass Works) and he will do the job.
He was one of the main installers for another company for 10+ years and assisted in many Motor Coach glass replacements.
I will POINT!
__________________
if you think my spellin is bad, you should sea my handwritten. #437 w/flex toad (STAY AWAY FROM LARRY BELL aka larrynjeri) he is a lier and a lock picker.
|
|
|
11-06-2010, 10:24 PM
|
#30
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Great, I will need to get the passenger side replaced on mine soon.
Please post his address and phone #.
Thanks,
Forest
|
|
|
11-07-2010, 12:17 PM
|
#31
|
Senior Member
Join Date: Feb 2006
Location: Iyopawa Island, Mi. (sometimes)
Posts: 421
|
You've got a deal Dean! When will you be here? I'll leave the light on for you! Actually, that sounds like a good solution. In our weather, we should shoot for sometime in the spring, if you are truly interested. Larry
__________________
1994 Newell #365 w/Corvette, 2002 streetrod 34 ford golf cart, 2009 Smart Car, 1958 Century Coronado, 1965 Cruisers Inc, CAR & BOAT CRAZY! LOVE OUR NEWELL!
|
|
|
11-18-2010, 11:26 PM
|
#32
|
Senior Member
Join Date: Mar 2009
Location: south louisiana
Posts: 654
|
Back to title (windshield replacement)
Done..... I'll try to attach photos
__________________
if you think my spellin is bad, you should sea my handwritten. #437 w/flex toad (STAY AWAY FROM LARRY BELL aka larrynjeri) he is a lier and a lock picker.
|
|
|
11-18-2010, 11:32 PM
|
#33
|
Senior Member
Join Date: Mar 2009
Location: south louisiana
Posts: 654
|
Quote:
Originally Posted by express1
Done..... I'll try to attach photos
|
I have other photos, but pretty easy job.... about 1hr. total for both sides.
Total cost $2985.00 with new gasket.
Something about new glass makes me smile
Yes, thats my son and his company......
__________________
__________________
if you think my spellin is bad, you should sea my handwritten. #437 w/flex toad (STAY AWAY FROM LARRY BELL aka larrynjeri) he is a lier and a lock picker.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|