|
12-19-2009, 02:54 PM
|
#1
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Rivets on awnings pulling out
A few of the rivets on my window awnings are starting to pull out. Is there anyway to tighten them? I have a small hand rivet gun but think these probably were installed with an air operated gun since they are so much larger. I may just replace them with stainless sheet metal screws. Thoughts?
__________________
|
|
|
12-19-2009, 04:28 PM
|
#2
|
Senior Member
Join Date: Mar 2006
Location: Indiana
Posts: 424
|
Hi Forest,
One of my friends used to own a small trucking company. They had one of those air powered rivet guns. We replaced a few rivets on my '78 a few years ago. It worked great. If you have a truck shop nearby you may find that they will replace those rivets at a reasonable cost. Maybe they will rent the gun to you and you can enjoy the satisfaction of doing it yourself!!
Dean
__________________
__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
|
|
|
12-19-2009, 04:34 PM
|
#3
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
are you referring to the long channel attached to the coach that mounts the awning to the coach?
if you are, something to think about is this. the screws would in most places only be going into the aluminum skin. the rivets may hold better.
with a little wind, there is a lot of force on that channel.
or are you referring to the brackets for the arms?"
i know that when zip dee sends new pieces they come with rivets and not screws for what that is worth.
tom
|
|
|
12-19-2009, 04:46 PM
|
#4
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
It's on the arms, and it's the small awnings not the main one. Yes I was thinking rivets may hold better, I'll try a truck shop- thanks Dean.
|
|
|
12-19-2009, 05:03 PM
|
#5
|
Senior Member
Join Date: Mar 2007
Location: mesa, az
Posts: 1,375
|
after seeing wally's rivet guns, i had to do some of the same. i have the marson small hand rivet gun and then i have one that is identical to the marson big daddy rivet gun. it is a very large hand one that i got a knock off of. do a google search on them. i carry them in the coach with rivets.
tom
|
|
|
12-20-2009, 05:13 AM
|
#6
|
Senior Member
Join Date: Apr 2007
Location: Minnesota
Posts: 326
|
I have the good Big Daddy and it works great. You can use aluminum, steel or stainless steel rivets and they pull very tight. I don't recall what I paid for it but it is a great tool. After every trip I check the exterior of the coach for rivet pops and replace them right away with the larger rivets.
This would be the right tool to replace the rivets on the awning that is being discussed.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|
|
|
12-20-2009, 05:18 PM
|
#7
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
Wow never knew there were so many different types of rivets!
They are 3/16", 1/2" long (which seems too short- may be why they are pulling out?)
I guess they are blind? aluminum? steel or aluminum mandrel?
Help!!
|
|
|
12-20-2009, 07:23 PM
|
#8
|
Senior Member
Join Date: Apr 2007
Location: Minnesota
Posts: 326
|
I don't know what your riveting but if your using the 3/16" rivets you make sure you are going 1/4" beyond the thickness of all the materials you drill through so the end of the rivet can spread enough to give a strong grab on the back side of the total of your metals.
If you are having a difficult time getting rivets go to a wholesale nut and bolt supply company and they should have a supply of pot rivets of all sizes and lengths.
I have some rivets that are over 1" in length.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|
|
|
12-20-2009, 08:42 PM
|
#9
|
Senior Member
Join Date: Sep 2008
Location: Thibodaux, LA
Posts: 1,221
|
These are for the arms of the zipdee window awnings. They are 3/16" diameter, 1/2" long, with a 7/16" head. They are not magnetic so are probably aluminum with alum. mandrel. The arm piece and gasket look to be just under 1/2" so these are probably too short. I'll look for 3/4" long rivets.
|
|
|
12-21-2009, 04:11 AM
|
#10
|
Senior Member
Join Date: Apr 2007
Location: Minnesota
Posts: 326
|
I used aluminum on mine. You can use stainless steel if you wish because you are fastening into the steel wall support chanel. Don't use plain steel because they will fail in time and leave rust stains on the exterior of the coach.
__________________
Wally and Phyllis
1988 Newell Coach #163
40' with tag 8V92
|
|
|
12-21-2009, 03:13 PM
|
#11
|
Senior Member
Join Date: Mar 2006
Location: Indiana
Posts: 424
|
This is where I got the tool for the solid rivets that I used to repair my door. They have all kinds of rivets and tools. Very courteous and knowledgeble. Fast shipping too.
http://www.bylerrivet.com/
Dean
__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
|
|
|
03-06-2010, 02:46 AM
|
#12
|
Member
Join Date: Apr 2007
Posts: 24
|
I get all my rivets here. I would recommend a rivet called tri-grip
http://www.hansonrivet.com/w36.htm great for aluminum and fiberglass plastics and other brittle and soft materials. Hope it helps
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|