Bay Door Lock Cores - Luxury Coach Lifestyles
Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Reply
 
Thread Tools Display Modes
 
Old 06-17-2012, 12:39 AM   #1
Richard and Rhonda
Senior Member
 
Richard and Rhonda's Avatar
 
Join Date: Oct 2007
Location: Huntington WV
Posts: 1,041
Default Bay Door Lock Cores

The screw that holds all the actuation parts and pieces to the lock core on one of the bay doors has stripped the threads out of the core. Therefore all the actuation goodies fall off and the bay cannot be locked. A longer screw to access fresh threads hits the end of the key and pushes the key out of alignment with the tumblers. Arrgghhhh.

Are the tumblers generic? Any idea who made them? Just thought I would ask in case one of you enterprising folk had replaced a lock core.

Yeah, I know, call Newell on Monday.
__________________

__________________
Richard Rhonda Ty and Alex Entrekin
1995 Newell # 390 DD Series 60, Allison World Trans
Subaru Outback toad
CoMotion Tandem
Often wrong, but seldom in doubt
Rhonda's chronicle https://wersquared.wordpress.com/
Richard and Rhonda is offline   Reply With Quote
Old 06-22-2012, 03:44 AM   #2
HoosierDaddy
Senior Member
 
HoosierDaddy's Avatar
 
Join Date: Mar 2006
Location: Indiana
Posts: 424
Default

Richard
I replaced all of the locks on my '93. A local lock smith provided them...all keyed alike. Otherwise I would put a little JB weld on that screw and snug it up.
__________________

__________________
1993 Newell 45'#316, 1976 Trans Am 455, 1967 GTO, 1953 Chevrolet 3105 (panel truck),1952 Chevrolet 3600,1969 Airstream Overlander. Always fixing something!
HoosierDaddy is offline   Reply With Quote
Old 06-24-2012, 03:42 AM   #3
ccjohnson
Senior Member
 
ccjohnson's Avatar
 
Join Date: Jan 2012
Location: Southwest NM
Posts: 346
Default

We bought all new lock cylinders for ours from Austin Hardware. Had to press out roll pins on new locking plates. But was an easy job. Then replaced the electric actuators with some I got from a salvage yard for $25 each. Got a weding shop to lengthen the rods on them for about $10. I think www.austinhardware,com will get you to their website.
__________________
Clint C. Johnson / Fran Balm
Coach 289 '92 42'6" 8V92 Hybrid
Several Toads:
XL-7
F-350 4X4 Crewcab
F-250 4X4 Crewcab
ccjohnson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Towing Advice - Jeep Liberty RussWhite Toads and Towing Concerns 15 05-28-2012 11:36 PM
add slides to older Newell series 2000 coaches? ttikalsky Upgrades and Customization 3 07-13-2011 10:44 PM
Radio Flyer folivier General Technical Discussion 2 10-07-2010 12:23 AM
Happy Easter to our Newell Friends encantotom Life on the Road | Livin' in Luxury 5 04-09-2010 11:52 AM
Need info on Motosat normal behavior Richard and Rhonda High Technology for the Big Rig RV 7 02-01-2009 08:19 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Newell Coach Corporation or any of its affiliates. This is an independent, unofficial site.


All times are GMT. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×